floppy drive

What computer fear? We are in daily use, there will be many details of the likely harm to the computer. For computers, the high temperature, humidity, power supply instability, severe impact, electrostatic, are all factors that can easily damage the computer, so the working environment around the computer is very important. However, the care of a good computer, or that each person should also be able to do so. Impact on the computer for easy following factors to illustrate the main points of maintenance.

1, high temperature

computer ideal temperature is 10-35 degrees to work, the temperature is too high or too low is not good. High temperature damage is mainly for temperature sensitive components, such as CPU. CPU operating temperature must not exceed 80 degrees, or very easy to burn CPU, and the best software to install temperature alarm. When using the computer in the summer,UGG Classic Cardy Boots are surpassing for solace, pay attention to indoor ventilation and cooling, so the best a computer room air-conditioned.

2, wet

moisture damage to the computer is also relatively large. General relative humidity between 30% -80% more appropriate. Easily lead to short-circuit if moisture properly. So when the air is too humid, boot must be careful. Also, be sure not to wet your hands to use a computer. Conversely, too dry is not good. Too dry and prone to static electricity, also easily harm the computer.

3, power supply

power surge is the process of computing a larger harm. Unstable voltage or high current moment are easy to cause heavier damage the computer. The normal requirements of the computer on AC power is 220V, 50HZ, preferably with a good grounding system, the best and then can use a UPS.

4, dust

as computer case is not completely closed, and static electricity will adsorb dust, so dust is easy to access the computer. When the dust attached to the integrated circuit surface, will cause poor heat, can cause serious short circuit. Drive, floppy drive, display fear drive. If the adsorption on the drive's bald too much dust, easily lead to a sharp decline in ability to read the disk. Damage and dust for the floppy drive is similar. In the display, too much dust monitor burn easily. Another example is the keyboard, mouse and other accessories, are afraid of dust. Therefore, it is best to take note of the computers and dust

5, vibration and impact

hard drive, optical drive, floppy drive is very afraid of the impact, they are rotating through the shaved head to read the disc. If you are violent impact, causing light scratch disc, causing the drive completely re-finished. Any computer user will not want such a thing.

6, electrostatic

static precision circuit board has always been the killer. When the static electricity accumulated to a certain extent, it will generate high pressure in the partial discharge, easily burned circuit boards. Protection of the simple approach is often to let the computer discharge, more bumper with metal objects the machine OK.

7, radio

the killer often overlooked fact that the danger point for the display is not small, the board also has interference. When the external radio signal stronger, the display of the electromagnetic field would be seriously disturbed, if the number is more than the display of the normal working condition would be affected. Therefore, it is best to avoid the use of computer radio interference.